隔离带钢模具的简介是参照大样图生产的，因为隔离带钢模具属于大型混凝土预制块模具，所以对于模具的质量要求非常严格，尤其是钢板的厚度，因为如果钢板薄了的话非常容易引起模具的变形，导致二次无法使用。隔离带钢模具基本知识是按照不同的图纸要求进行下料、生产，这就形成了一整套护栏模具的生产模式，来图定制或者按照具体模具尺寸进行加工。隔离带钢模具生产分为两种，一种是预制生产，一种是现场浇筑，两种生产模式对应的模具样式也有区分，按照模具规格大小来确定使用何种生产方式。The use mode and description of the isolation strip steel mold are on both sides and in the middle of the highway or expressway, and there are many names for the concrete isolation strip steel mold, such as the isolation strip mold, anti-collision barrier mold, separation strip mold, etc. Although the names are different, the production of the actual mold and precast block is the same path. From the simple and small isolation pier mold used in the past to the large-scale concrete isolation strip mold with more and more complex drawing design, the whole process is a manifestation of the technological progress of the mold production. At present, the main application scope of isolation strip steel mold includes parking lot, community, highway, expressway, square, etc. as long as the flow of people and vehicles is involved, the concrete isolation belt will be applied.

The introduction of the isolated strip steel mold is produced with reference to the detail drawing. Because the isolated strip steel mold belongs to a large concrete precast block mold, the quality requirements for the mold are very strict, especially the thickness of the steel plate, because if the steel plate is thin, it is very easy to cause the deformation of the mold, resulting in secondary unusable. The basic knowledge of isolated strip steel mold is to cut and produce according to different drawing requirements, which forms a complete set of production mode of guardrail mold, which can be customized according to the drawing or processed according to the specific mold size. There are two kinds of isolated strip steel mold production, one is prefabrication production and the other is on-site pouring. The mold styles corresponding to the two production modes are also distinguished, and the production mode is determined according to the mold specification.